After years of weather on the Chesapeake the teak on this boat has changed. The old varnish has failed and needs the be removed. After that I clean the teak to remove the oxidation and dirt. This makes the teak ready for a old system that I have mastered over the years. This system isContinue reading “Teak Revived after Years of Weather”
Author Archives: Teak Dr.
#4 Great Use For Lynn⚓️Sea Handmade Soap
Here is another fun video showing a great use for my handmade linseed oil soap! https://youtu.be/rEQuqr3eWqw
Lynn⚓️Sea Soap fun video!
My wife made this fun video shaving her legs with my handmade linseed oil soap. Just one of many great uses for this organic liquid soap. Thanks hon, looking great!!
Finished teak rub rail with Deks Olje!
Just finished the six coat of D2 varnish. Looking great and the owner is very pleased! The oil varnishes provide such a deep rich color for your Teak. Please give a call to discuss this great method of teak refinishing. I’m going to become a distributor for the Deks Olje products along the Western shoreContinue reading “Finished teak rub rail with Deks Olje!”
A Short Video Of Our S2 11 Meter Redo
Thanks to my wife Stephanie for putting this fun video together! Russlynn Redo
Teak Rub Rail done with Deks Olje
The 30′ Westsail is getting her teak rub rail re done. The old varnish was peeling off and needed to be removed. Once the varnish was removed I cleaned the teak with Deks deck cleaner and proceeded to apply the D1 oil three coats. Now I’m applying the D2 oil varnish six coats! Deks OljeContinue reading “Teak Rub Rail done with Deks Olje”
Finished our S2!
I’m very happy to say our S2 11 Meter is going in the water! The total project took just about five months from start to finish. The entire hull has been redone including fixing the rudder. I used Interlux products and West System for the patching and the rudder work. I used bright sides forContinue reading “Finished our S2!”
Applied first coat of bottom paint!
We are getting close to finishing our boat Russlynn! I just applied the fist coat of bottom paint. I decided to go with a hard bottom paint, Interlux VC Offshore. I’ll apply two coats. Just have to prep where the jack stands were barrier coat and apply the bottom paint. We are scheduled to launchContinue reading “Applied first coat of bottom paint!”
Finished the Topside!
I just finished painting the top sides of our boat. The job came out great! I used Interlux Brighsides with the Pre Kote primer(2) coats. Application method was tip and roll. This method worked well leaving a smooth gloss finish. Use of the 333 brushing thinner necessary around ten percent. Results are looking great plusContinue reading “Finished the Topside!”
I just wanted to show another great way to use my Linseed oil soap. I found this hand pump in our recycle bin at the marina. It was corroded and look like it hadn’t been cleaned in years! Just a bucket of warm water a stainless steel scrubber and the soap. The results are greatContinue reading “Lynn⚓️Sea Cleaning”